How far can $25,000 take a napkin-sketch product idea? No fixed budget guarantees a prototype or a finished product, and the answer depends less on the sketch itself than on how carefully the idea is validated, defined, designed, and tested before money is committed to production. In Episode 1 of The Design Orchestrator, “Inside One3 Design,” host Mike Downer sits down with Clay Martin, CEO of One3 Design, a product development firm with facilities in Iowa and Georgia, to explain how its product development services move an idea from initial concept toward commercialization. The key takeaway is simple: successful product development requires a roadmap, the right expertise, and serious diligence before fabrication begins.

How Did Clay Martin Get Into Product Development?

Clay Martin’s path into product development started far from a traditional design office: he grew up in rural Oklahoma, working around farms, ranches, agricultural equipment, and mechanics, before studying engineering at Oklahoma State University.

His curiosity about how things worked eventually pushed him toward mechanical engineering, drafting, and computer-aided design. After college, his career moved into contract engineering and consulting before he eventually became involved with One3 Design.

That background still influences his approach today. Rather than seeing engineering as simply creating drawings or calculations, Martin approaches product development as a problem-solving process that connects design decisions to how something will eventually be manufactured and used.

How Did One3 Design Grow Beyond Contract Engineering?

One3 Design grew out of contract engineering, where engineers often worked as extensions of larger companies, once Martin saw the limits of that model. As he put it on the episode, “We were kind of seen as an extension, and we were also expendable.” A contractor might contribute one piece of a project without controlling what happened before or after that stage.

Over time, One3 expanded into a broader product-development operation combining engineering, shop services, fabrication, prototyping, and outside manufacturing partnerships. Martin describes the company as something resembling a smaller-scale OEM, capable of understanding the entire path from concept to a commercialized product.

That broader perspective matters because a good-looking concept is not automatically a manufacturable product. Materials, manufacturing methods, target costs, testing requirements, supply chains, ergonomics, and production schedules can all change what ultimately gets built.

What Are One3 Design’s Five Steps From Idea to Commercialization?

One3 Design’s five steps from idea to commercialization are discover, define, design, build, and deliver, the stage-gated framework Martin returns to throughout the conversation.

Discovery comes first because the team needs to understand why the product should exist. What problem does it solve? Who needs it? What market will it enter?

Those questions help define the project before expensive engineering begins. Martin emphasizes mapping what is known, identifying variables, understanding the problem, and creating a structured roadmap before moving toward a solution. As he puts it, “if you spend a lot of time in the diligence arena upfront defining where you are headed, then getting there is a lot easier and far more cost-effective.”

That principle also aligns with the U.S. Small Business Administration’s emphasis on market research before making major business decisions and the broader role of prototyping demonstrated through the NIST Manufacturing Extension Partnership.

Why Do Engineering and Manufacturing Need to Connect?

Engineering and manufacturing need to connect because, as Martin explains, every handoff between separate design firms, engineering teams, prototype shops, and manufacturers can introduce communication problems, delays, added markup, and opportunities for scope creep.

One3 tries to reduce those gaps by managing the overall development roadmap while completing many activities internally. When outside specialists are needed, the company brings those partners into the same managed process.

This becomes especially important during design for manufacturing. One3 wants suppliers to receive parts that already account for their manufacturing processes rather than discovering late in development that an attractive concept cannot realistically be produced.

Prototyping provides another bridge between digital design and production. Examples documented through NIST’s rapid prototyping programs show how physical prototypes can help inventors refine concepts before moving further toward commercialization.

What Should an Inventor With a Napkin Sketch Do First?

For an inventor starting with little more than an idea, Martin’s advice is not to immediately start building. First understand the problem, the market, the desired outcome, and the variables that will determine whether the idea works.

Intellectual property may also become part of that roadmap. The U.S. Patent and Trademark Office’s patent guidance recommends determining whether patent protection is appropriate and researching similar inventions as part of the patent process.

Ultimately, Martin views One3 as a product-development partner rather than simply a vendor. The goal is to connect the disciplines required to take an idea from something imagined to something manufacturable, testable, and eventually sellable.

For entrepreneurs asking how far $25,000 can take a napkin-sketch product idea, the episode does not claim that a specific budget guarantees a prototype or finished product. Instead, its strongest lesson is that whatever the budget may be, carefully defining the problem and development roadmap first can help ensure that money is spent on the right work.

Watch the Full Episode on YouTube

To hear Clay Martin tell the full story, from rural Oklahoma to One3 Design’s five-stage process, watch Episode 1 of The Design Orchestrator on YouTube.

FAQs

How far can $25,000 take a napkin-sketch product idea?

No specific budget guarantees a prototype or a finished product, so the answer depends on the idea. Clay Martin’s advice is to put diligence first and define the problem, the market, and the roadmap before fabrication, so the budget is spent on the right work.

Can a napkin sketch become a real manufactured product?

Yes. A rough concept can begin the development process, but it typically needs validation, engineering, CAD development, prototyping, testing, and manufacturing planning before commercialization.

What should happen first when developing a new product?

Start by defining the problem, intended customer, market, requirements, and desired outcome before committing heavily to engineering or fabrication.

What are One3 Design’s five product-development stages?

One3 describes its process as discover, define, design, build, and deliver.

Why is prototyping important?

Prototypes let teams evaluate functionality, dimensions, usability, manufacturing considerations, and design assumptions before committing to larger production investments.

Does every product need a patent?

No. Patent eligibility and business value vary by invention. Inventors should evaluate their intellectual-property strategy and seek appropriate professional guidance.

Why does design for manufacturing matter?

It helps ensure parts can be produced using realistic materials, tolerances, tooling, and manufacturing processes without requiring major redesign later.

Can outside specialists still be part of an integrated development process?

Yes. Martin explains that specialized suppliers and partners can be brought into the project while one team continues coordinating the broader development roadmap.

Mike Downer: Hello, everybody, and thanks for joining me on the One3 Design Orchestrator Podcast. I am your host, Mike Downer, and this is a show about how products actually get built, from the first idea on a napkin to a finished product rolling off the line.

This show will take you inside the process that most people never see.

Again, I’m your host, Mike, and today’s episode is special because we’re kicking the whole thing off with the main man behind One3 Design, Clay Martin. How are we doing today, Clay?

Clay Martin: Doing well, Mike. Thank you.

Mike Downer: Good deal. This is the first time you and I have gotten to talk, so I’m just wanting to get to know you a little bit.

Before we get into One3 Design and everything you guys do, tell me about you. Where are you from? What’s your background? Give us a little history on Clay Martin.

Clay Martin: Sure. I appreciate that.

As you might guess from the southern intonation, I’m a little bit of a cowboy, hillbilly, country fellow. Maybe all of those things combined. I definitely come from a rural part of the country, out in northwest Oklahoma, in a little town called Waynoka, Oklahoma.

I made my way to Oklahoma State along that trajectory to get an engineering degree. Prior to getting into engineering, my history was largely based on farm and ranch work, working on agricultural equipment, working out in the sun, and doing a lot of labor-type things. That motivated me to get into something that allowed me to sit in conditioned air and on my rump a little more, I guess you would say.

I’m kind of a workaholic by nature, and now by profession. In my chosen profession, it works well. So that’s a little bit of history about me: the country boy from the sticks who made his way to the city.

Mike Downer: Very cool. So the little country boy ended up with a mechanical engineering background at Oklahoma State.

Clay Martin: He did.

Mike Downer: Was engineering always the plan, or what were you into growing up?

Clay Martin: Interestingly, I wouldn’t say engineering was necessarily the plan from the get-go. Based on my upbringing and background, I don’t know if I really knew what engineering was. My father worked on the railroad, so I probably would have equated being an engineer with driving a train back in those days.

But I always loved taking things apart. I always loved understanding how things work. That is one of my core passions in life now. I have a real problem moving forward with things if I don’t understand how they work before I utilize them or move forward as part of my problem-solving process.

I actually started out pre-med when I entered college. I always liked math and science, but I think one zoology class, where they indicated we were headed to the morgue to dissect cadavers, made me rethink my approach to my profession. So I went the engineering route.

Interestingly, I used to take drafting classes as electives while I was still on that pre-med path and heavily involved in science. That is where I was really exposed to computer-aided design, drafting, and those kinds of things, just as something I enjoyed doing.

My high school football coach, Coach Krizop, had taken me on a field trip when I was a senior and trying to figure out my life. He exposed me to those things, and that ultimately led to me putting together the elements of understanding how things work, curiosity about how things work, the drafting process, and how those things related to engineering. Ultimately, that helped me see what that world might present for me.

Mike Downer: Very cool. After Oklahoma State, what did your career path look like? You didn’t go straight to One3. Walk us through what happened between college and Cedar Falls.

Clay Martin: The entrepreneurial spirit was definitely something embedded in me from the early days. I started out with a paper route when I was eight. That evolved into a lawn mowing business. I worked for a mechanic shop, learned things there, and started doing some freelance mechanic work.

I got my tractor driver’s license so I could do farm work out in the rural part of the country where I grew up. That continued to evolve.

By the time I got to college and got into the engineering degree, I also got into an internship with Brunswick Corporation, working for MerCruiser in Stillwater, Oklahoma, where Oklahoma State is located. That created the opportunity for me to come in contact with some guys who are still lifelong friends, partners, and colleagues.

We organized and started our first design engineering company with some other gentlemen. It was called Progressive Engineering. That is ultimately where I started dipping my toe into consultation back in 1994 or 1995, working with Progressive, doing freelance work, and getting exposure to the world of three-dimensional design.

That was really the initiation that indoctrinated me into the world of consultation and design development.

From there, I left Progressive and started my own organization, Clay Martin Consulting Incorporated. Really catchy title, right? I owned and operated CMCI for a number of years before becoming involved with One3 Design.

Mike Downer: Very cool. Let’s talk about One3 Design. The company was started back in 1998, but you came in later. How did you first cross paths with One3?

Clay Martin: Interestingly, the previous name of One3 Design was Surfacing Solutions. It was started by a colleague of mine whom I met in the late ’90s while I was on-site at a design consultation job in Cedar Falls, Iowa, with John Deere.

I was operating under Progressive Engineering in those days, and that evolved into CMCI. I developed a relationship with the prior owner of One3, which was Surfacing Solutions at the time, and we partnered on projects. We found opportunities to work together between our two organizations.

That is ultimately where the connective tissue was created between my previous organization, my smaller-scale contract engineering agency, and Surfacing Solutions, which became One3 Design.

Moving forward from there, in 2015, I merged CMCI into the rebranded One3 Design, still in association with its founder, and took over as director of business development, then ultimately director of engineering and CEO, and then with the acquisition in 2022.

Mike Downer: Very cool. You mentioned that the previous owner started this thing in 1998 all by himself, and you said the company was called Surfacing Solutions. What was the company like when you walked in the door in 2015?

Clay Martin: That’s a great question.

I would say the company had evolved quite a bit from its early days. The inception of Surfacing Solutions was around 1999 or 2000 with incorporation, and then the rebranding occurred sometime after 2010. I forget the exact date.

My origins, and the origins of One3 Design, were in contract engineering. We were an extension of existing companies. That was the business model for some time in organizations like ours: almost engineers for hire. We would go on-site and spend a lot of time in the environments and buildings of our clients, working alongside their product designers, project managers, and program managers.

We were kind of seen as an extension, and we were also expendable. When they didn’t need us, they booted us, which made sense. That’s the life of contract engineering.

But that landscape, in my mind, was always something that needed to evolve. You were always one big exodus away from, “All contractors are no longer needed,” or “This project has been canceled.” You were really at the mercy of the business model of the businesses you were embedded into.

I always thought that was a limiting perspective, and I wanted to broaden the horizons of what we could be.

In those early days of contract engineering, that is where we started. As the previous owner broadened the company’s capabilities, the shop facility was opened in Cedar Falls to provide repair, relife, and refurbishment services for agricultural and construction machinery.

The facility in Grovetown opened within that general context, but it evolved into fabrication. Engineering and product development were always a core ingredient of what we were.

I started seeing that opportunity, and I would say the former owner saw it as well: diversification and broadening the spectrum into more of a full-scale, end-to-end product development company. That is the evolution from contract engineering to a full-service product development company.

Mike Downer: Very cool. In 2022, you purchased One3. That’s a big decision with any company. What made you say to yourself, “This is what I want to own. This is what I want to build”?

Clay Martin: Another great question. Thanks, Mike.

I knew the talent that was there. I understood the talent. I helped build that structure in my partnership with the founder. I saw the potential for what we could grow it into based on that foundation.

We had a ways to go. We had to shift gears in some places, but I knew the foundation, structure, and bones of what I wanted to do were ultimately in place. I had confidence in the people. I think we had a good culture and a good diversification of skill sets.

I felt like we were in a position to do things that other companies in our space couldn’t do because of our capabilities with these facilities: the physical build capabilities, the understanding from a product’s inception to when it is rolling out the door, and our exposure to and association with large OEMs.

That gave us access to the knowledge of what end-of-line product looked like and what finished, commercialized product looked like. In taking a look at all those constituents of the business, my confidence in acquiring One3 was that I felt like we had all the ingredients to make the right kind of cake.

Mike Downer: I’m going to expand on that just a little bit more. When you took over, did you have a vision for what One3 could become that was different from where it was? What did you want to build? What was your ultimate goal?

Clay Martin: Ultimately, to expand on my previous points a bit, I felt like if we were a company of astute design engineers, mechanics, technicians, and fabricators who understood what end-of-line finished product looked like, not only what it looked like and how it was represented in the marketplace, but also the steps of validation and qualification from a commercialized production-product perspective, then I started seeing us as a mini OEM.

In other words, when we were inside the facility of, let’s say, John Deere, Caterpillar, or Harley-Davidson, we had some great opportunities to be resources in those facilities. You understand that those OEMs have a lot of capability and internal, vertically integrated disciplines that are all part of the product development process.

In those days, and to some degree still today in some places, we were pieces of that product development process for companies that had all the other pieces and didn’t necessarily need us to step in with our expertise. In some places, we were brought in because of the specific niche expertise we had. In other places, we were an extension when they needed more hands on deck.

But I also started to realize and recognize that for all those disciplines in the product development process needed under one roof for OEMs, we could be a smaller-scale version of that because we understood what all those pieces needed to be.

Whether it was having full-time employees incorporated into One3’s fabric of personnel, or strategic alliances with expertise that we knew existed in the industry and could become part of our team as needed, we started developing that model of being that bookended, from-concept-to-commercialization solution that we saw in some of the larger-scale OEMs.

That allows a lot of our clients to become a larger-scale organization when needed, or to step out and have us partner with them and expand on their internal capabilities. Ultimately, we bring the capabilities of a larger organization to them.

But we also stay very dialed in and focused on the development of our niche strengths, our core strengths, to differentiate us from others and to stay true to where we focus our development efforts in terms of our talent.

Mike Downer: Beautiful. Let’s talk about what One3 looks like today. You’re in Cedar Falls, Iowa, in a 15,000-square-foot facility. You’ve got a facility in Grovetown, Georgia, and about 30 people. Walk us through what happens inside those walls.

Clay Martin: Without giving trade secrets away?

Mike Downer: I’ll keep a little stuff under the hood as much as possible.

Clay Martin: We’re pretty transparent. We like to share our methods and processes, but we do keep some secret sauce a little cloaked, as any business would.

What I like to describe our product development team as, in particular, is a kind of virtual product development division. We are in, I think, eight different states now with our resources, either working out of their homes, in satellite offices, or on-site with clients as required.

We also have these facilities in Cedar Falls, where the company originated and the founder established the initial organization, and in Grovetown.

In those facilities, particularly the Cedar Falls facility, that is where you are going to find the shop services capabilities. We have mechanics, technicians, diagnostic capabilities, large multi-ton cranes, and expansive space to pull in machines of all shapes and sizes and perform work on them.

I wouldn’t describe it as a mechanic facility like an automotive repair location, though we have that level of capability. It is really geared toward understanding how to take large-scale, production-quality material and perform refurbishment, diagnose issues, and bring products back to production quality. These may be products that have been used in testing, may have high hours on them, and need to be taken back to what production looks like.

The Grovetown facility was initially established to largely mimic what the Cedar Falls facility was put in place to accomplish: assisting nearby OEMs with ship-hold machine revitalization and things of that nature. That facility ended up evolving into our fabrication facility through the acquisition of laser cutters, press brakes, welders, and so on.

We started seeing the opportunity to diversify beyond repair into build and fabrication, and into the creation of products within the walls of the organization.

Most of what we would call our design studio is this virtual environment. We communicate with our resources through the internet, online team sessions, and information sharing. We communicate with most of our clients this way because the capabilities we now have in technology facilitate not only communication and collaboration, but also allow us to pull in resources from wherever they are in the country and not limit ourselves to a geographical location in terms of the virtual work we can do.

A virtual design center is the way I would describe it.

Mike Downer: That’s extremely interesting, running both of those facilities.

Here’s what I find fascinating about One3. You’re not just a design shop. You’re not just an engineering firm. You’re not just a machine shop. You do all of it. How do you describe what One3 actually does to someone who has never heard of you?

Clay Martin: Again, very astute question, Mike. I appreciate getting to talk to folks who are curious about what we’ve invested so much time, energy, and passion into, because we are truly passionate about it.

Mike Downer: And a couple of dollars, too.

Clay Martin: Yeah, yeah. I’ll take care of you.

When somebody comes in with a design idea, there is a wide spectrum of solicitation that we get. I had some interesting meetings this morning with independent inventors who have ideas and are just curious about whether their ideas have legs.

They ask, “How do I go from this thing in my head? I was fishing with my dad and had this idea. Can it go somewhere? What are the hurdles I would encounter? I have a napkin sketch. Where do I go from here?”

There is a lot of curiosity in that space. Then you have mature companies that know exactly where they are headed and how to get their product out the door, but they are looking for assistance and innovation. They are looking for assistance with industrial design ideation, mechanical engineering validation, creativity, design innovation, and product development.

When people inquire about what we do, sometimes we refer to ourselves as a product incubator. At One3 Design, we take an idea from concept to commercialization, from the spark of an idea through the multi-stage process we go through.

We have a five-step process that we use internally: discover, define, design, build, and deliver. That is the stage-gated approach we take to problem solving.

We are going to investigate and learn what your issue is. We are going to define what we are solving. That creates the roadmap into design, where we work in CAD, in the virtual environment, and within our shop facilities to build prototypes, test, and build proof-of-concept models. Ultimately, we deliver in that commercial space, assist in the development of supply chains, figure out how to get your product to market, and partner with you in that space.

Whether it is taking someone who is less familiar with the product development process, such as an individual inventor, a startup company that has been funded and is trying to get over the hump, or a large OEM that understands our particular areas of specialization and expertise, we can help.

We have focused our specialization in areas where we know we have adept capabilities, but we also know those capabilities take a multi-decade effort to develop. If a company does not possess them, or has not retained them, they can leverage us in that space.

Mike Downer: You said something that stuck with me. You said the real question buyers are asking is, “I have an idea, and I want to go to one place that knows how to get me there.” Can you unpack that? What does that mean for the companies you work with?

Clay Martin: Sure. That is a question we are often asked, especially by people on tight schedules and focused budgets. The handoff to multiple external resources becomes problematic, and you end up bottlenecking the process and the communication from one organization to the next.

When they are wondering, “How do I get this idea into reality?” a lot of the questions we can answer are answered by illustrating the roadmap from that spark of an idea.

What are the first steps we take? We lean on that multi-stage process. We step into the discovery phase and ask the right questions. We investigate where the origins of the idea came from, what drove them to move into this space, what market they are trying to play in, what problem they are trying to solve, and what solution they are striving for.

Then we map from there to the end of the process. We are going to build CAD models. We are going to ideate as a team. We are going to solve the key issues that need to be solved to produce a product that is manufacturable and cost-effective. We are going to be aware of target sell prices, production schedules, and all the things we have to be cognizant of in that process.

All those stages require various disciplines, educational backgrounds, experiential backgrounds, and knowledge of engineering, manufacturing, finished product appearance, and things like that.

When we say those are all pieces of the process you may or may not have within your organization, we help you understand what those are, identify whether you are lacking those pieces if you have not yet identified that, and fill in the missing pieces for you.

It may be with skill sets, machinery, equipment, and processes we have in-house. If not, we undoubtedly have the right partnerships and strategic alliances in the industry that fill every one of those spaces.

That is where we say, under one virtual umbrella or one virtual roof, we understand and know how to fill in all the pieces from concept to commercialization at One3 Design.

Mike Downer: Very cool. Clay, let me ask you this. Most companies in product development do one piece of the puzzle, like you were talking about. A design firm designs. An engineering firm does engineering. A machine shop does fabrication. Why did you decide One3 needed to do the whole thing?

Clay Martin: To some degree, and supporting what I said a moment ago, we run into inefficient time losses and the handoff that happens from one organization to another. You also have the markup. Obviously, when you are going outside, everybody has to have a profit margin.

As that begins to stack, if it is not streamlined, you can really elevate costs quickly and elongate lead times unnecessarily.

When we serve in that orchestrator space, we are helping you own that roadmap and bring all those pieces together while taking out the roadblocks.

We try to do as much as we can internally, but we recognize that some specialized service offerings require us to go get the best in the business. I often say that I’m usually two or three phone calls away from the best in the business in anything in product development. If we don’t do it, I probably know somebody who does.

We will bring those people into the conversation, but we will also illustrate to the client the program management aspect of it. It is still running through us. We are managing the schedule. We are bringing the right people to the table to have the right conversations. Then we are assuring that we are all sticking to the plan in a way that minimizes scope creep, minimizes disturbances in the schedule, and produces a more optimized deliverable.

Mike Downer: Very good. Clay, I know you are a very humble man.

Clay Martin: Very much so.

Mike Downer: In the little time I’ve known you, I can tell. There you go.

We are going to do a little name-dropping here, just because we have to. You work with some of the biggest names in heavy equipment and agriculture: John Deere, Caterpillar, Toro, Vermeer, Club Car, Bad Boy Mowers, and I’m sure the list goes on.

What is it about One3 that makes companies like that trust you with their product development?

Clay Martin: I think one of the key things we always emphasize is that we know what done looks like.

To know what done looks like, you have to be familiar with commercialized, mass-produced product. You also have to be really familiar with, comfortable with, and conscious of the requirements it takes to build things, mold plastic, form metal, cast metal, heat treat for the appropriate strength result, and apply various types of coatings and protective elements that go into product development.

There is a lot of science to it. There is a lot of needed, known information required to know what “out the door” looks like. I think that is one of the key differentiators between us and a lot of other places.

As you mentioned earlier, there are folks who are industrial design companies, and they are great. They are focused on industrial design. But when they hand off some of those concepts, they are not necessarily designed for reality.

Someone listening to this in this space can certainly relate to getting great concepts, but none of them are manufacturable. Or there is a lot of work to be done before they are ready for manufacturability.

If you are talking about a great engineering company that wants its package to be elegant, maybe they lack the refined product design knowledge and industrial design application to ensure ergonomics, aesthetic appeal, and so on have been introduced into the product.

We understand that, appreciate that, and have the ability to translate industrial design ideation into the design space so that it is produced for manufacturability. That is something we excel in.

When you get to the manufacturing space and you are working with a lot of really great suppliers and all those different manufacturing processes, understanding the requirements of their process sets us apart.

You almost become a tooling designer, manufacturing engineer, mechanical engineer, and industrial designer all in one. We feel like we are unique in that space.

When we hand a product or design back to a client, and we are working with their supply chain, and the suppliers come back and say, “We didn’t really have to do much. One3 designed the part correctly for our processes,” that is a real badge of honor for us because it took a lot of years to develop that knowledge and expertise in what end-of-line is downstream from where product ideation lives.

Mike Downer: Very cool. Tell me about your in-house manufacturing capability. A lot of design firms outsource fabrication. You actually build in your own shop. Walk us through what that means to a client.

Clay Martin: You said two key things there that I want to make sure I touch on: build and fabricate.

We have built things for a long time in our shop services division in Cedar Falls, Iowa. We have absolute expert mechanics and technicians up there who know how to tear a machine apart and put it back together, or build it from scratch and do everything right. They understand what needs to be confirmed and validated before that product is introduced back into client space.

That knowledge, and the origin of that knowledge, made its way into the Grovetown facility. Its origins evolved into this: we understand how to build things, tear them apart, and put them back together, to simplify it a bit.

Upstream from there, we also understand the manufacturing process through our association with so many supply agencies out there. So we started bringing some of that in-house and focused on metal fabrication.

That was an easier space to step into than, say, building an injection molding factory or dedicating ourselves to injection molding machines and building injection-molded dies. We want those specialists to specialize in their space and partner with them.

But in the fabrication and build space, we are able to bring so many of these product concepts into reality. Whether we are bending, welding, and painting the metal ourselves, or contracting plastics expertise externally, including injection molding companies, rotomolding companies, and vacuum-form companies that can make product for us and deliver it to our facility to be combined with the metal structure we have been building.

That also feeds into casting houses as well.

We are a piece of manufacturing capability in fabrication and build, but we bring partnerships with all manufacturing capabilities into that alliance. That allows us to bring those things in-house, put components together, and design them for all those various processes.

So much of what we do in heavy equipment, agriculture, and the EV space utilizes the idea of end-of-line metal product, but also conceptualized product in that fabricated metal space before clients commit to more production-type processes. We can facilitate the representation of that in those developmental stages within our buildings.

Mike Downer: Very cool. You’ve told us a little bit about yourself, your background, the company history, and what you’ve built it into. We’ll start heading toward the end of the podcast here with just a few more questions.

We’re going to get to know a little more about you and your philosophies. So I’m going to do a little more back-patting here. You have 12 patents to your name. First off, that blows my mind. You’ve consulted on PTC Creo for over 25 years. You bought the company. You clearly love this work.

What drives you? What gets you up in the morning?

Clay Martin: That’s another great question.

I think I may be closer to 15 or 20 patents now. But I’ll tell you, brother, I’ve worked with guys and colleagues in the industry who would say that is nothing. They have 100. There are far more impressive representations of that than I have.

Mike Downer: I have zero.

Clay Martin: It is all based on background and what you do every day. I am excited and proud of the ones I have. I have some in partnership with our clients. I have others that are individualized, including a patent or two in the medical arena and some in the exhaust space for internal combustion engines. Those were very educational.

Those are the result of doing what you love. If you are part of that and driven to be innovative and creative, you end up becoming part of opportunities where your work is considered novel and you make it into that patentable space.

That becomes some cool things you can put on your wall and be proud of in terms of the history of what you do.

But I would emphasize that, for me, jumping out of bed every day and doing what I do is truly more about elevating our people and our clients to be the best representations of what they can be.

Everybody needs money to make ends meet. Money is this abstract concept for my pragmatic brain, but it is a necessity. It is the capital infusion needed to move things forward. But it is not what gets me out of bed.

I get out of bed because I like solving problems. I like watching people and organizations blossom and realize their capability and manifest that into success. I like watching them grow as people.

I would imagine that if you communicated with most of my clients, if not all of them, over my 32 years of consultation, I look at all those people as family and friends. They don’t feel like clients. They don’t feel like people I am just doing work for and collecting a check from. They are true partnerships.

I would say we are a product development partner. We are a solutions partner.

I get a lot of calls from people who don’t even know where to start or what question to ask. It is not easy to point them toward a given discipline. It is, “Hey, I have a problem. Do you have an idea of how to solve it?”

I love those because that speaks to the fact that I have this organization I am part of that is full of problem solvers and creative people who are motivated by finding an answer for the client.

Even if it is a referral to the right folks, it is about coming up with the solution that will get people the answers they need and develop confidence in them. That confidence brings them back to the well of collaboration with us and the partnerships we try to establish with everyone we are involved with.

Mike Downer: Very cool. You mentioned companies, and you said you like to talk to people who don’t know where to start. If you could sit down with a company that has a product idea and they are at the very beginning, just an idea, and they don’t know where to start, what would you tell them? What advice would you give them?

Clay Martin: I actually had this experience this morning with a new inventor, a great guy, a young man in the military who had a cool idea. After thanking him for his service, I got to lay the roadmap for product development out for someone less familiar with it.

I stepped back to those five steps: discover, define, design, build, and deliver.

That very first stage of discover is this: you have an idea. Let’s learn more about where that idea originated. What problem were you solving? Did you see an opportunity to make a living from it? Did you see an opportunity to solve a problem? Did you see an opportunity to recreate emotion within yourself or a group of people who partake in the same hobbies you do, enhancing their lifestyle and happiness?

There are so many directions product development can originate from.

For large-scale companies that are established and produce a particular product line, they may come to us and say, “We’ve investigated the market space, and we think this is the bleeding-edge area to get into and be innovators in. We need your help.”

They already have a direction, but we are still in that stage of asking, “What does the roadmap look like to get there?”

When you don’t know where to start, I always go back to my engineering education. I think back to my thermodynamics professor, who was adamant about mapping everything you know in a structured fashion. Map all the knowns. Map all the variables you have latitude to change. Illustrate the problem. Then show me how you are going to solve it.

That carried through into my profession. If I know what the problem is and I have a vision for what you are trying to solve or achieve, then I can break that into the pieces we need in terms of activities, disciplines, functions, and processes to define the path to arriving at an answer.

Once we have defined what we believe a potential solution to be, we will build a structured roadmap to design a machine, component, system, or other solution that will deliver on all your goals in terms of what that product turns out to be.

In some cases, you are also helping someone define what that product could be and what market it could reside in. Someone may know they need a solution but not know what the product could look like. There is a lot of investigation, conversation, and research that can go into what that product needs to be.

But if you spend a lot of time in the diligence arena upfront defining where you are headed, then getting there is a lot easier and far more cost-effective.

I don’t know if that fully answered the question, but it is really about backing up and illustrating that roadmap of product development.

A smart person who works with me reminds me constantly that you have to hear something seven times before it becomes fact. Sometimes you have to repeat that a whole lot, but when it settles in, people embrace that map and that path to getting where they are going.

Mike Downer: One hundred percent.

We’re just about done here. I’m just about done grilling you, but I do have to sound like your prospective job employer here and ask this question: What’s the future for One3? Where do you see the company in five years?

Clay Martin: You sound like some of our employees: “Where are we headed? What can we expect? What’s on the horizon?” Those are great questions.

As you said, in the visionary role, or the orchestrator or engineer driving the vision forward, I have to think about this stuff often. It is about the continuation of identifying what strengths we need to continue to hone and refine, what core elements of the product development process we need to stay on top of, and what is coming down the pike that we need to be aware of.

AI is making a big impact. Changes in how products are manufactured are important. We have to be aware of what those are, pay attention to the rapid prototyping space, and understand how additive manufacturing is changing the game.

It is about staying on top of technology, process, and the zeitgeist of the industry. How are people solving problems? How are they incorporating these new tools to get a product to market faster?

My vision for One3 is to continue to expand in that space, partner with the right people, bring the right talent in, and make sure we are doing everything we can to facilitate all stages of the product development process.

We need to maintain the right partnerships, bring in the right customers and clients who can benefit most from what we do, and we from them in that relationship. It is about maintaining a sense of awareness in the industry and among ourselves as to how we can best fulfill the need in an ever-evolving product development landscape.

Mike Downer: Very cool. We’ll get this wound up.

We have 48 episodes planned for this podcast. We’ve got a bunch of them mapped out, and we’re going to cover everything from how you validate a product idea to scaling manufacturing to equipment relife services. We’re going to cover a lot more than that.

Out of all these things we’re going to be covering, what are you most excited to dig into? I know you’re passionate about all of it, but what are you really excited to dig into?

Clay Martin: What really makes me most invigorated about talking to a potential partnership base that could benefit from collaboration with One3 Design is focusing on how the pieces of our business intertwine, intermesh, and complement each other.

How do we leverage the capabilities of each division between shop services, fabrication, and product design? How do we leverage those divisions to be either the full, bookended, end-to-end solution for you or to leverage those strengths and capabilities for your specific need, helping you define what that is?

As we continue forward in the conversation, showing how that connectivity puts us in what I think is a special space for problem solving, and applying expertise in those various areas to the right solution, is exciting to me.

Certainly, I get excited about speaking to the specificity of the technology. I didn’t dig super deep earlier into the fabrication space. We have 175-ton and 110-ton press brakes. We have a 4,000-watt laser cutter. We have laser welders and all those specific things within that facility.

Getting down to the nuts and bolts of how we leverage those things and produce something tangible for you, something you can put in your hands and learn from, is exciting.

Mike Downer: We’ll break all that down. This is when you’ll get to geek out a little bit and tell us all the fun stuff, which I love.

Clay Martin: Self-professed geek.

Mike Downer: You’ll get excited, no question. I love it when I’m talking to somebody and they really get excited about what they do. You’re going to be talking way over my head, but I’m sure that every time I talk to you moving forward, I’m going to feel a lot smarter. I’m very much looking forward to that.

Okay, last question. You’ve hung in there with me really well, and I appreciate that. If someone is listening to this and they have an idea and need a partner, how do they reach One3 Design?

Clay Martin: Our website, One3Design.com, is a great place to start. We have a contact section of the website that allows you to solicit service by answering some questions and then submitting an email and contact information.

That can be a little tricky because you get fake solicitations at times, and people try to get you to respond and be a little mischievous in that space.

But I would say the website is a big spot. Reaching out to one of our locations through the contact information on the website is another option. People can also reach out to me personally at clay@one3designinc.com or through my mobile number. Should I list it here on the podcast?

Mike Downer: That is 100 percent a no. I would say no phone numbers on here. Clay, you’re a great-looking dude, but this is not a dating service.

Clay Martin: Yeah, always kind of cautious there.

They can definitely get to me through the website, solicit us there, or call one of our main offices. Through that directory, they can get to myself, any of the division leads, or our management team.

Mike Downer: Yes, sir.

I appreciate all your time today. Again, I feel much smarter after talking to you, and a little bit dumber in some aspects, but I really look forward to all these episodes and digging deep into what you guys do.

I think this is extremely interesting. This is one of the most interesting conversations I’ve had in a long time. Again, I appreciate your time and the fact that you gave me almost an hour of your time to learn a little more about you and your business.

I look forward to really getting to know your business inside and out.

Clay Martin: I appreciate it, Mike. Thank you for your time as well.

Mike Downer: Thanks. You take care, and we’ll talk to you on the next episode.

Clay Martin: All right, brother. Thanks a bunch.